Rotary Shear Lines are mainly used for CR, S.S, Al material, precision leveling and cutting products. This line special advantage is non-stop cutting which avoid micro – indentation by stopping to cut. It is applicable for high precision aluminum plate, mirror S.S plate, etc., with short cutting length product.
It consists of Uncoil, Leveling and Cross Cutting metal strip as set length and proper blanking system; Compared with stop start shear Cut to Length line, rotary shear line can achieve cutting the plates without stop feeding, higher speed, better accuracy and surface protection. Every of these functions are accomplished by our machines which are designed to cope with an impressive variety of material features ranging.
- Material thickness ranging from 0, 2 mm to 3 mm.
- Maximum strip width 1800 mm
- Maximum sheet length 8000 mm
- Tensile strength 1200 N/mm2
Other functions are available to the customer’s needs such as Edge Trimming, Balling or Chopping of scrap edges from strip, Paper and Plastic Film interleaving and many more. Our CTL are designed to comply with the highest demand in quality and production output with care to safety for operators and ease of maintenance.
The flying shearing line is applied to machine cold-rolled carbon steel, silicon steel, tinplate, stainless steel and surface-coated metal materials.
Rotary Shear Cut To Length Lines main machinery:
1. Coil car
2. Decoiler
3. Peeler table
4. Precision leveler
5. Loop Bridge
6. Side Guide Roller
7. Servo feeder
8. Rotary shear Machine
9. Conveyor table
10. Stacking table
12. Lifting table
13. Hydraulic Systems
14. Pneumatic Systems
15. Electrical System PLC Control
Rotary Shear Machine-Technical Parameter
| Parameters/Model |
Processing Thickness(mm) |
Processing Width(mm) |
Cutting Accuracy(mm) |
Max. Speed
m/min |
Max. Cutting (times/min) |
Uncoiling Weight(ton) |
| RS-2x650 |
0.2-2 |
100-650 |
±0.3 |
80 |
150 |
5 |
| RS-2x800 |
0.2-2 |
100-800 |
±0.3 |
80 |
150 |
8 |
| RS-2x1300 |
0.3-2 |
400-1300 |
±0.3 |
80 |
150 |
15 |
| RS-2x1600 |
0.3-2 |
400-1600 |
±0.3 |
80 |
150 |
20 |
| RS-3x800 |
0.3-3 |
100-800 |
±0.3 |
70 |
150 |
8 |
| RS-3x1300 |
0.3-3 |
400-1300 |
±0.3 |
70 |
150 |
15 |
| RS-3x1600 |
0.3-3 |
400-1600 |
±0.3 |
70 |
150 |
20 |
