RISHBIN CO., LTD
RISHBIN CO., LTD
Add to Cart
Light Gauge Steel Slitting Line Brief Introduction
Without a tension stand, the slit material from the center of the master coil would take up more quickly while the outboard strips would hang loosely. The recoiler is an expanding mandrel type. The recoiler takes up the slit mults. The recoiler mandrel is fitted with an overarm device which is a shaft with separator discs which prevent interleaving of the narrower coil widths.
The position of the discs are directly in-line with the slitting knives. The finished slit mults are banded on the outside diameter and are pushed off of the recoiler mandrel onto an awaiting coil car or turnstyle.
| Model No. | RS0.2-1.8 | RS0.3-3.0 | RS0.8-4.0 |
| Coil Material | CR Coils , HR Coils, S.S Steel Coils, GI Coils ,AL Coils, Copper Coils Picking Oil Coils | ||
| Coil Thickness | 0.2～1.8mm | 0.3～3.0mm | 0.8～4.0mm |
| Line Speed | 0～150/300m/min | 0～150/300m/min | 0-120/200m/min |
| Coil Weight | ≤10T(15T) | ≤20T(25T) | ≤25T(30T) |
| Coil I.D | φ508mm | φ508mm | φ508,φ610,φ760mm |
| Coil O.D | ≤φ1600mm | ≤φ2000mm | ≤φ2000mm |
| Strip Width | ≥15mm | ≥25mm | ≥25mm |
| Number of Strip | 5～15 | 8～20 | 5～15 |
| Slitting Accuracy | ±0.1mm | ±0.15mm | ±0.25mm |
| Blade shaft | Ф220mm | Ф240mm | Ф240mm |
| Electrical Control System | PLC Automatic control | PLC Automatic control | PLC Automatic control |
